Forum Discussion
Printer
How to connect my HP PRINTER laser jet pro MFP M148fdw
Your problem is pretty common among T-Mobile Internet users. This usually fixes the problem.
Try adding a new WiFi network for the HP. Use the T-Mobile app and tap the Network tab on the bottom, then the “+” button on the lower right. Create a new 2.4 GHz WiFi network with a unique name (SSID), just for your printer. Make sure the WPA type is WPA/WPA2. This is different from your main network which, by default, is WPA2/WPA3. Lastly, make sure the Hidden switch is set to Off. Scroll down and click Save and your gateway will restart.
Now, go to your printer and clear out all of the information you have entered for your printer’s setup and then recreate your wireless connection to the new network you just created.
Good luck.
Your problem is pretty common among T-Mobile Internet users. This usually fixes the problem.
Try adding a new WiFi network for the HP. Use the T-Mobile app and tap the Network tab on the bottom, then the “+” button on the lower right. Create a new 2.4 GHz WiFi network with a unique name (SSID), just for your printer. Make sure the WPA type is WPA/WPA2. This is different from your main network which, by default, is WPA2/WPA3. Lastly, make sure the Hidden switch is set to Off. Scroll down and click Save and your gateway will restart.
Now, go to your printer and clear out all of the information you have entered for your printer’s setup and then recreate your wireless connection to the new network you just created.
Good luck.
@Rodneym21 in addition to @bocaboy2591’s comments, you might find the following video helpful:
I hope this helps!
