User Profile
mcotterman
Roaming Rookie
Joined 12 months ago
User Widgets
Contributions
Re: SyncUP Kids Watch Battery Replacement
The battery arrived and I was able to successfully replace it. The battery itself is connected with a really small connector (not soldered or ribbon clipped, etc). It is a little fidgety to get it to stay down as you secure the main internal panel, but once the panel is secure it isn’t going anywhere. A magnifying glass, a small Phillips screwdriver and some decent electronics tweezers got the job done. In my case the expanded battery did most of the work getting the back off the watch, so that may be a little tricky. I suspect careful use of a heat gun and some electronic plastic prying tools will do it. I may end up re-sealing the enclosure at some point to help with water resistance, but the back seems fairly secure with just the plastic clips. That said, there is a good risk that a kiddo could pull the body off the backing without some adhesive in there, so could be a choking risk if your kiddo is small. Here is a link to the battery I used: https://www.aliexpress.us/item/3256805129966382.html I’m also attaching some pictures of the battery connector and the inside of the watch48Views0likes0CommentsRe: SyncUP Kids Watch Battery Replacement
Not yet. i did get the watch the rest of the way separated with the help of a heat gun and ordered a replacement batteryon Aliexpress. We’ll see how it goes in a couple of months when it gets here. The battery looks like it is a P0963 1ICP6/26/28.20Views0likes0CommentsSyncUP Kids Watch Battery Replacement
The battery on our SyncUP kids watch was swollen up and popped open the case. I have not pulled it the rest of the way apart to see if I can replace the battery yet. I thought I would post to see if anyone has made the attempt yet. Obviously the battery is not normally user replaceable, but at this point I've been wasting money on service I cannot use. Thank you! -MikeSolved1.3KViews0likes7Comments