It’s official! T-Mobile & Sprint have merged!
Sprint support pages are available for existing Sprint accounts here. If you are looking for more, visit our Migration Center.

Learn how to use WPS if your Wi-Fi device supports it so you do not have to enter a password manually after a WPS connection has been established.

 

Connecting from WebUI Manager

To connect your Wi-Fi device securely using the hotspot WebUI Manager follow these steps.

Push button

  1. Access the hotspot WebUI Manager.
  2. Click Settings > WPS.
  3. Activate the WPS connection on the device you want to connect to the hotspot.
  4. Click Push WPS Button.
  5. Wait a moment for a successful Wi-Fi connection.

Device PIN

  1. Access the hotspot WebUI Manager.
  2. Click Settings > WPS.
  3. Activate the WPS connection on the Wi-Fi device you want to connect to the hotspot.
  4. Enter the device’s 8-digit PIN code in the hotspot WebUI Manager.
  5. Wait a moment for a successful Wi-Fi connection.

 

Connecting with WPS button

To connect your Wi-Fi device securely using the WPS button on your hotspot follow these steps.

  1. Keep the T-Mobile Hotspot in range of the device you want to connect with.
  2. Turn on your mobile hotspot by pressing and holding the Power button for 3 seconds.
  3. Open your Wi-Fi network manager on your computer, smartphone, tablet, or other Wi-Fi enabled device.
  4. Connect your Wi-Fi enabled device to your hotspot by selecting your mobile hotspot’s network name (SSID).
  5. Press and hold for 5 seconds the WPS button located on the bottom of the mobile hotspot.
  6. Your Wi-Fi enabled device will start connecting.

Was this helpful?