Support
SUPPORT New to T-Mobile? Switching is easy Set up your device Using the app Sprint Migration Center All get started topics Ways to pay your bill All about your bill Line permissions Your T-Mobile ID Your PIN/Passcode All account resources topics T-Mobile Network In-flight texting and Wi-Fi Wi-Fi Calling International roaming Mobile Without Borders All network & roaming topics Find the right plan Neftlix on Us HotSpot plans Voicemail Use Mobile HotSpot All plans support topics Tutorials Troubleshooting Unlock your device Change your SIM T-Mobile eSIM All device assistance topics Account Hub I-Billing Home Office Internet Collaborate Line permissions All business support topics

Use this page to identify software versions for the Samsung Galaxy Tab S7+ 5G as well as details on recent software updates.

On this page:

 

Identify the device's current software version

Android 10 / 11

  1. From the Home screen, swipe up on an empty spot to open the Apps tray.
  2. Tap Settings > About tablet> Software information.
  3. View the Baseband version and compare it to the section below.

 

Review software version details

VERSION RELEASE DATE ENHANCEMENTS STATUS

Android 11

Baseband version:
T978USQU2BUE1

June 27 2021
  • May 2021 Security Updates
  • Quick Share updates

Available June 27, 2021

If your device meets the requirements below, this update will be available to download.

To prevent download issues, there's a daily limit on downloads. If it's not available yet, check back tomorrow or after July 2, when the daily limit is lifted.

Android 11

Baseband version:
T978USQU2BUD3

May 9, 2021
  • April 2021 Security Updates
  • Additional security updates

Available May 9, 2021

If your device meets the requirements below, this update will be available to download.

Android 11

Baseband version:
T978USQU2BUBB

April 4, 2021
  • March 2021 Security Updates
  • Adds Direct Writing
  • Enables Dolby Atmos

Available April 4, 2021

If your device meets the requirements below, this update will be available to download.

Android 11

Baseband version:
T978USQU1BUA8

February 1, 2021
  • Android 11
  • January 2021 Security Updates

Available February 1, 2021

If your device meets the requirements below, this update will be available to download.

Android 10

Baseband version:
T978USQU1ATJ9

February 1, 2021
  • Standalone 5G
  • November 2020 Security Updates

Available February 1, 2021

If your device meets the requirements below, this update will be available to download.

Android 10

Baseband version:
T978USQS1ATJ5

October 22, 2020 October 2020 Security Updates
Available October 22, 2020

Android 10

Baseband version:
T978USQU1ATI2

September 21, 2020 Android 10 OS and other updates
Available September 21, 2020

Android 10

Baseband version:
T878USQU1Ath5

September 18, 2020 Original launch software Available September 18, 2020

 

Determine update requirements

Your device must meet the following requirements to update your software to the most current version:

  • 50% or higher battery life
  • Data connection
  • File size: 504 MB

 

Update software versions

Update automatically over the air (OTA)

  1. From the Home screen, swipe up on an empty spot to open the Apps tray.
  2. Tap Settings > Software update > Download and install.
  3. Wait for the device to check for updates.
  4. Tap OK > Start.
  5. When the restart message appears, tap OK.

 

Update from a computer

Follow the update requirements above, along with the following:

  • Use a Samsung USB cable.
  • Back up your data prior to completing the update.

During the update, do not:

  • Use the device or press any keys.
  • Remove the battery, if applicable.
  • Turn off the device.
  • Disconnect the USB cable until the update is complete.

 

You will not be able to place a call during the update, not even an emergency call.

  1. Download and install Samsung Smart Switch that is compatible with your computer from http://www.samsung.com/us/support/smart-switch-support/#!/.
  2. Connect the cable to a compatible USB port on your computer.
  3. Connect the other end of the cable to your tablet.
  4. Allow your computer to install any required drivers for your device. This process may take a few minutes.
  5. Open Smart Switch on your computer, and allow it to make the connection.
  6. If a software update is available for your device, Smart Switch will automatically prompt you to update. At any time, you can click Update.
  7. Click Update to begin downloading the necessary files.
  8. Click OK to proceed.
  9. Your device may turn off and on a few times during the update process.
  10. Once complete the device will return to the Home screen.

 

Issues after updating

If you experience issues after updating to the latest software version, follow these steps:

  1. Wipe your cache partition to make sure that all system files on your device are put back in order.
    1. Turn off the device.
    2. Press and hold the Volume Up key, then press and hold the Power key.
    3. When the Android logo displays, release all three keys.
    4. An 'Installing system update' message will show for 30 - 60 seconds before the Android system recovery menu options appear.
    5. Press the Volume down key several times to highlight wipe cache partition.
    6. Press Power key to select.
    7. Press the Volume down key to highlight yes, them and press the Power key to select.
    8. When the wipe cache partition is complete, Reboot system now is highlighted.
    9. Press the Power key to restart the device.
  2. If wiping the cache partition does not work, you may need to perform a master reset.
    1. Back up data on the internal memory. If you have signed into a Samsung account on the device, you have activated Anti-theft and will need your Samsung credentials to finish the master reset.
    2. From the Home screen, swipe up on an empty spot to open the Apps tray.
    3. Tap Settings > Accounts and backup >Backup and restore.
    4. Tap the following sliders to desired setting:
      • Back up my data
      • Automatic restore
    5. Tap the Back key (bottom right) until you reach the main Settings menu.
    6. Tap General Management > Reset > Factory data reset.
    7. Scroll to the bottom of the screen, then tap RESET > DELETE ALL.
    8. If you have screen lock turned on, enter your credentials.
    9. If prompted to verify your Samsung account, enter the password, then tap CONFIRM.
    10. Wait for the device to reset.

Was this helpful?