Support
SUPPORT New to T-Mobile? Switching is easy Set up your device Using the app Sprint Migration Center All get started topics Ways to pay your bill All about your bill Line permissions Your T-Mobile ID Your PIN/Passcode All account resources topics T-Mobile Network In-flight texting and Wi-Fi Wi-Fi Calling International roaming Mobile Without Borders All network & roaming topics Find the right plan Neftlix on Us HotSpot plans Voicemail Use Mobile HotSpot All plans support topics Tutorials Troubleshooting Unlock your device Change your SIM T-Mobile eSIM All device assistance topics Account Hub I-Billing Home Office Internet Collaborate Line permissions All business support topics

Use these steps to support network settings on the LG G Pad X2 8.0 Plus.

APN & data settings

  1. From the home screen, tap Apps > Settings.
  2. Under 'Wireless & Networks,' tap More.
  3. Tap Mobile networks > Access Point Names.
  4. If available, tap the T-Mobile LTE APN (the bullet point fills with green). If not available, tap the Menu key, and then tap Add APN. A separate APN must be added manually for the Reset to default option to appear.
  5. Verify and update the following settings for the Data APN:
    • Name: T-Mobile US LTE
    • APN: fast.t-mobile.com
    • Proxy: <Not set>
    • Port: <Not set>
    • Username: <Not set>
    • Password: <Not set>
    • Server: <Not set>
    • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS proxy: <Not set>
    • MMS port: <Not set>
    • MMS protocol: WAP 2.0
    • MCC: 310
    • MNC: 260
    • Authentication type: <Not set>
    • APN type: <Not set> OR Internet+MMS
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4
    • Enable/disable APN: <greyed out unless there are multiple APN's>
    • Bearer: Unspecified
  6. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.

Manual network selection

The device detects and registers on wireless networks inside T-Mobile’s calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

  1. From the home screen, tap Apps > Settings.
  2. Under 'Wireless & Networks,' tap More.
  3. Tap Mobile networks > Network operators > Search networks.
  4. The phone searches for networks. This takes several minutes.
  5. Tap to select the desired network. The phone registers you on that network.

Switch 2G / 4G

  1. From the home screen, tap Apps > Settings.
  2. Under 'Wireless & Networks,' tap More.
  3. Tap Mobile networks > Network mode.
  4. Tap one of the following desired band settings:
    • WCDMA/LTE (auto)
    • WCDMA (only)

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

  1. From the home screen, tap Apps > Settings.
  2. From the 'Networks' tab, tap the Airplane mode switch to turn it on or off.
  3. If prompted, review the Airplane mode message and then tap OK.

Turn on / off data roaming

  1. From the home screen, tap Apps > Settings.
  2. From the 'Networks' tab, tap More.
  3. Tap Mobile networks.
  4. Slide the Data roaming switch to turn it on or off.
  5. If prompted, review the Attention message and then tap Yes.

Turn on / off mobile data

  1. From the home screen, tap Apps > Settings.
  2. Under 'Wireless & Networks,' tap More.
  3. Tap Mobile networks.
  4. Slide the Mobile data switch to turn it on or off.

Was this helpful?