Learn about your T-Mobile Jet 2.0 4G Laptop Stick.

 

Computer System Requirements

Microsoft Windows

Important: It is strongly recommended Windows XP be updated to Service Pack 3. This update will increase overall improvement to the performance of the computer.

  Windows XP Windows Vista Windows 7
Processor

300 MHz 32-bit

Note:

64-bit is not supported

1 GHz 32-bit

1 GHz 64-bit

1 GHz 32-bit

1 GHz 64-bit

Note: Starter, Business, Enterprise, Ultimate versions of Windows 7 are NOT supported.

RAM 256 MB 1 GB 1 GB
Hard Drive Space 100 MB 120 MB 160 MB
Web Browser IE 5.5 IE 7 IE 8
OS Service Pack / Version Service Pack 2 or later Service Pack 0 or later Service Pack 0 or later
USB Version USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

Mac OS X

Important: Mac 10.7 (Lion) is not officially supported, but can work if Java Realtime is installed.

 

Mac OS X 10.4

(Tiger)

Mac OS X 10.5

(Leopard)

Mac OS X 10.6

(Snow Leopard)

Processor Power PC G3 876 Mhz Intel
RAM 256 MB 512 MB 1 GB
Hard Drive Space 100 MB 120 MB 160 MB
Web Browser Safari Safari Safari
OS Service Pack / Version Version 10.4.11 or later Version 10.5.8 or later Version 10.6.4 or later
USB Version

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

USB 2.0 or USB 3.0 port

 

Indicators

Indicator lights

Use the following table to understand what status the indicator light is showing:

Light Status
Blinking green twice every 3 seconds Data stick is powered on
Blinking green once every 3 seconds EDGE registration
Blinking blue once every 3 seconds 3G registration
Blinking red Data stick is powered on and searching for the SIM card
Solid red Data stick is powered on and searching for an available network (EDGE, 3G)
Solid Green Established EDGE connection
Solid blue Established 3G connection
Off No power

Liquid Damage Indicators (LDI)

Every T-Mobile device includes an indicator that shows if it has been damaged by water or other liquid, thereby voiding the warranty. To view the Liquid Damage Indicator (LDI), remove the cover from your device.

Refer to the following figures to read the indicator:

White LDI (Indicates no liquid damage) Red LDI (Indicates liquid damage)


 

Memory card

Your laptop stick supports a microSD memory card (not included with your purchase).

Memory card - insert

To insert the memory card, follow these steps:

  1. Remove the back cover.

  2. Insert the memory card into the memory card slot with the golden contacts facing the back of the laptop stick.

  3. Press the memory card in until it clicks into place.
  4. Replace the back cover.

Memory card - remove

To remove the memory card, follow these steps:

  1. Remove the back cover.

  2. Push in the memory card and release. The card should pop out of the slot.
  3. Replace the back cover.

 

SIM card

Your Subscriber Identity Module (SIM) card identifies you to the wireless network. You will not be able to connect to the network without your SIM card.

SIM card - insert

To insert the SIM card, follow these steps:

  1. Remove the back cover.

  2. Insert the SIM card into the SIM card slot as shown.

  3. Replace the back cover.

SIM card - remove

To remove the SIM card, follow these steps:

  1. Remove the back cover.

  2. Slide the SIM card out of the SIM card slot.
  3. Replace the back cover.

Was this helpful?