Forum Discussion
T Mobile Home Internet & Google Home & Alexa
Help. I am battling to connect either Google Home Speaker or Alexa (Echo) speaker to T Mobile Home Internet. I have reset the devices but nothing. Both try to connect but can’t finalize the instal and can’t finalize setup connection. Any ideas please.
Also...how many devices can you add to home internet. I have the high speed internet gateway (grey tower). I have read conflicting numbers. 10 or 20 (10 on 5g 10 on 2.4g) or 64.
- ripleyRoaming Rookie
Yes! I had the same issue with my Google Home devices after the firmware upgrade to .0168. After three long hours on the phone with support and a call back from another expert, T-Mobile sent me a replacement refurb gateway with .0143 firmware installed. No problems (so far).
- TroyMRoaming Rookie
Yes all of my Google devices that use Google Assistant have the same exact issue. Chasw I'm curious as if you're going to be able to maintain connectivity to the T-Mobile home internet. I also have the gray tower and although my speakers do connect on occasion, they seem to lose connectivity frequently when I activate the Google Assistant.
The problem is far worse with my Chromecast with Google TV. But that is tight heavily with Google Assistant so that is the reason why I'm making that connection with all of my Google devices. Even my Pixel 4 XL mobile phone, which rides on Google Fi's mobile service, also loses connectivity to the T-Mobile home internet Wi-Fi router.
As I have read through other threads, I feel there is definitely an undiscovered issue with T-Mobile home internet and Google devices that use Assistant.
- TykissonRoaming Rookie
Did you get any idea of the cause of this? I have the same issue with my Google devices have stopped working. They act as if they are not communicating out.
- syaoranTransmission Titan
Make sure your Google Assistants and Amazon Alexa’s are using the 2.4GHz WiFi, set manually to 2.4GHz, channel 6 with AES for encryption. 10 devices is about the maximum for devices spread over both the 2.4GHz and 5GHz channels combined.
- Danibri5Newbie Caller
So what has worked for me is to factory reset the gateway device. Once you set it up log into the settings online (192.168.12.1) and divide the 2.4hz and 5gz. But after you separate them go to configure ssid 5, under set ssid to configure make sure to go through all of them and turn off any "enable ssid" other than the ssid 5. For me the ssid 9 was named the same as my 2.4 and Google devices don't like 5gz. Sorry if this is confusing wording but I hope it helps.
- Paul_INewbie Caller
Hi. Had the same issue, Alexa didn't connect with T-mobile gateway. It worked 3 months as it should and then it stopped to connect to wifi. After some time with the amazon representative over the phone, I went to the settings for T-mobile gateway and change the frequency from "Automatic" to 2.4 Hz. And it was done! No issue so far. Hopefully it can help someone else as well !!!
- chaswNewbie Caller
Thanks Ripley. I finally got it to work (not sure how!). I think it was the 2-hour wait for the call center that motivated me to persevere!
- JArgoNewbie Caller
Did anyone ever figure this out without having to exchange routers? My google home speakers will not connect or work and when I swapped to my old windstream internet, they connected just fine and continued working, so I know the issue is the T Mobile internet, not the Google. :-(
- buckybRoaming Rookie
Does anyone have an update for this? I just got TM home internet this week and all the same problems with Google Home and Chromecast. They’re on the network so they can pull data but other devices can’t find them nor use casting features. I’m on the latest tower and firmware.
The disappointing part is I’ve had multiple calls with TMO support and they said their engineers do not report seeing any problems here and they are NOT working on a fix. I said it was all over their own forums so how do we get that going and they only said if a bunch of people call and report tickets.
One guy told me to try and segment the 2.4 and 5ghz networks which I’ve seen mentioned but haven’t had the chance yet. I really wasn’t planning on setting up my own router.
- alloo66Newbie Caller
I had to do a hard reset on my Google Home Devices and I closed and reopened the Google Home App, then I was able to add my google home devices to my home. It seems to be a Google Home app issue.
Related Content
- 4 months ago
- 4 months ago
- 4 months ago