Forum Discussion
unable to connect Chamberlain Liftmaster garage door opener (myQ app) to T-mobile 5G internet
I have been using the T-mobile home internet for a week now. It works just fine except that my Chamberlion LiftMaster garage door opener (myQ app) cannot connect to it. I would appreciate it if anyone could suggest a solution. Thanks in advance.
After many tries , my buddy brought over his old Orbi and it worked flawlessly! I tried TPlink Deco S4 and it was not successful after trying every possible scenario. Uggg
One Fix for the win👇
NETGEAR ORBI (RBR20)
I wish TMobile would fix the solution so we wouldn’t have to buy devices to fix the solution.
I also read in another forum that the TMobile Sagemcom 5688 works fine vs the KVD21 , in which I have the KVD21. Which gateway model do you have ?
- fireguy_6364Modem Master
most things your wifi will need to connect to in a home will need a 2.4Ghz connection. if it does not see it, it wont be able to connect. are you able to see both the 5Ghz and 2.4Ghz connections?
- Skeet22Roaming Rookie
RayLynn wrote:
Sadly it all worked will with the round Nokia node but the new black square node won’t connect to the liftmaster. Tried every which way but no luck. I moved the node close to the LM but still no go it must be a setting I can’t access on the TMobile node. I will try a separate router plugged in and see how it goes.
I swapped this node because it is suppose to have the capability of more than one cell tower connection but cant verify this.
Juse got the new updated router model# 5688w it takes care of that problem. I went a year trying to get the old one to work
- Skeet22Roaming Rookie
New Tmobile router model # 5688w solves this problem
- TBlankNewbie Caller
Had the same frustrating problem. Read some posts that the problem was the old model KVD21 router, which I had. Spoke to Tmobile and had the send me the newer model 5688w and that fixed the problem.
- Krunalp87Newbie Caller
I did change my gateway to 5688W and have added 2.4 ghz with new ssid and security wpa/wpa2. Restart the gateway and working fine right now.
- Reid830Newbie Caller
After many tries , my buddy brought over his old Orbi and it worked flawlessly! I tried TPlink Deco S4 and it was not successful after trying every possible scenario. Uggg
One Fix for the win👇
NETGEAR ORBI (RBR20)
I wish TMobile would fix the solution so we wouldn’t have to buy devices to fix the solution.
I also read in another forum that the TMobile Sagemcom 5688 works fine vs the KVD21 , in which I have the KVD21. Which gateway model do you have ?
- Reid830Newbie Caller
Yes. I can see 2.4 and 5
- RayLynnNetwork Novice
Sadly it all worked will with the round Nokia node but the new black square node won’t connect to the liftmaster. Tried every which way but no luck. I moved the node close to the LM but still no go it must be a setting I can’t access on the TMobile node. I will try a separate router plugged in and see how it goes.
I swapped this node because it is suppose to have the capability of more than one cell tower connection but cant verify this.
- HanafiNewbie Caller
I linked an old ASUS router, given to me by Sprint, aeons ago, to the TMobile gateway, created a new ID and MyQ recognized it. HEALED!! No need to buy a new extender if you’re an equipment hoarder.. 😎
- SteevoNetwork Novice
How do yo you connect the Orbi without an internet provider?
Related Content
- 8 months ago
- 2 years ago
- 2 years ago
- 3 years ago